Rear View in Orange/Navy

Fire Armour MODATech TTMC-W Overalls

BRAND: Syzmik Workwear


The Syzmik Fire Armour range has been created to offer the highest level of performance possible while addressing the major complaints that consumers have had about existing FR products available. As well as delivering on uncompromising protection, Syzmik Fire Armour takes a leap forward in current FR solutions with fabrics that solve the issue of heat stress and comfort.

The exclusive MODATech® fabric used in the Syzmik’s Fire Armour Orange Flame range gives high level of inherent HRC 2-10 Cal protection in a fabric that is light, soft and amazingly cool.

At Syzmik we understand that an FR garment has to be cool and comfortable enough to wear or workers will simply not wear it. To combat this we developed MODATech® Fabric that provides outstanding moisture wicking characteristics in a light 240gsm fabric that delivers high level HRC 2–10 Cal Arc Flash protection as well as EN ISO 14116:2008 and EN ISO 11612:2008 certified flame protection.

The use of a fibre called Tencel® in the MODATech® blend gives the fabric its incredible cooling and moisture wicking properties. The Tencel® Fibre has been shown to absorb 50%* more water then Cotton giving incredible moisture wicking characteristics (*Source: The fucitonal Propteries of Tencel: A Current Update 2006).

Key Points of MODATech® Fabric:
Cool and comfortable 240gsm HRC 2–10 Cal protection Inherent FR characteristics that will never wash or wear out.
Highly moisture wicking fabric.
Soft to touch.
Tough enough to last the test of time with high abrasion and tearing resistance.


48% Modacrylic/37% Lyocel/15% Meta-Aramid blend - 240gsm.


Unmatched comfort and coolness thanks to the highly wickable, breathable and soft Modatech® fabric.
Concealed two way FR zip centre front closure as specified in NENS.
Meets TTMC-W regulations.
All Trims FR rated.
Stand up collar and gusset sleeve extra protection.
Large Cargo pocket.
Two chest pockets and one mobile phone pocket with covered FR press stud closures.
FR rated mesh in the under arms and upper back to keep you cool.
Loxy FR Tape.
FR rated label that clearly shows FR rating of garment.


Certified ENA NENS 09- 2014 Electrical Arc Hazard Protection Standard Compliant.
Certified NFPA 70E Workplace Electrical Safety Protection Standard Compliant.
Certified APTV 10 Cal Rating Protection Standard Compliant.
Certified EN ISO 14116:2008 3/5H/50 Personal Flame Retardant Protective Clothing Protection Standard Compliant.
Certified EN ISO 11612:2008 A1,B1,C1 Personal Flame Retardant Protective Clothing Protection Standard Compliant.
Certified AS/NZS 4602.1.2011 High Visibility Class D/N Day/Night Standard Compliant.
Certified AS/NZS 1906.4.2010 High Visibility Class R/F Retro-reflective and Fluorescent Fabric Standard Compliant.
Certified AS/NZS 4399 Ultra Violet Protection Factor UPF50 Standard Compliant.


All orders are sent via Australia Post to your nominated delivery address. From the time we dispatch your order please allow between 3 to 5 business working days for your order to be delivered within city and suburban areas of Australia. Delivery to rural and country areas in Australia may take longer than 3 to 7 business working days to be delivered. Orders delivered to you by Australia Post.


Orders below the value of $120.00 including GST incur a shipping fee of $9.95 including GST.

Orders over the value $120.00 including GST there is no handling and administration fee charged.


Returns are accepted for faulty goods purchased online within 20 days from date of purchase. In order to return or exchange goods products must be in the same condition as originally received and include labels and tags attached.

Our Full Policy can be read here: Refunds and Returns


Rain and Shine Workwear Australia offer an embroidery service for all your PPE, Workwear and Business Wear.

Embroidered logos and designs can be applied to almost all Workwear garments such as jackets, shirts and pants.

What do we need from you?

To provide a quote we require:

The Workwear garments (SKUs) and associated quantities you want embroidered. - typically a minimum quantity of 10 items applies
A high resolution digital image of your logo (JPEG, GIF, TIFF, PDF or EPS).

Cost and Lead Time

Artwork Preparation

There is a one off charge of $66 (inc. GST) to digitise your logo.


Cost per garment is $6 (inc. GST) for a single standard logo.

Lead Time

On artwork approval, lead time is approximately 5-10 working days.

Next Steps

Call us toll free on 1300 138 405 and Rain and Shine Workwear Australia Customer Service representative will follow up with your enquiry.
You can also leave instructions during the checkout process that embroidery is required and our team will give you a call back on the number provided with the order.

Copyright 2020 Rain & Shine Workwear Australia
All Rights Reserved | ABN: 88 960 589 383

All prices are listed in Australian Dollars and include GST.
Please call us on 1300 138 405 for any bulk purchasing enquiries.